欧米諸国の求人
overseas job
ロンドン・ドイツなど含めた欧州、オーストラリア・アメリカの求人などがあります。
欧米諸国の求人では、メーカーで国内の新規開拓営業、ITシステム会社でのヘルプデスクエンジニア、金融業界のスペシャリスト、ゼネコンの現場担当者など、多数の職種の求人があります。
案件を絞りこむ
求人情報を検索する
欧米諸国求人
USA26-06-22GJJINT3
【アメリカ求人】Electrical Engineer｜ロボット・自動化設備メーカー [008]
業種
メーカー
勤務地
Madison, AL
仕事内容
自動化設備・ロボットシステムの電気設計および制御開発を担当いただきます。
PRIMARY DUTIES
Primary duties include, but not limited to, the integration, programming, and troubleshooting of automated industrial equipment. This position will require involvement from initial project stages , through development and design, on to onsite installation and debugging, and post installation customer support.
PRIMARY TASKS
Design and elaborate electric hard wiring diagrams and electric circuits using AutoCAD software. Select, order, and purchase of any and all electrical components needed for each project. Follow up on orders and assemble, wire and elaborate electrical cabinets and panels. Assist in the preparation and wiring of all cabling and wiring. Establish and insure correct conditions and sequencing through PLC and HMI programming to meet customer standards. Set up, establish, and correct proper communicate in between robots, welders, and all safety components, through either hard wiring or communication modules like CC-LINK, DEVICE-NET, COMPO-BUS, COMPO-NET, PROFI-BUS. PLCs and HMIs to work with will include , but not limited to MITSUBISHI, OMRON, ALLEN BRADLEY, and SIEMENS.
ADDITIONAL TASKS
Assist in keeping and maintaining inventory of all commonly used electric components like relays, terminal blocks, wires, cables, conduit and cable shielding, cord grips, zip ties, cable mounts, etc.
We do not have a Janitor on staff, currently all Nagoya Wel employees are responsible for the upkeep and cleaning of all areas in the facility which include shop, offices and restrooms. We have an established rotation schedule that insures a fair rotation of responsibility, but all employees are required to comply.
PRIMARY DUTIES
Primary duties include, but not limited to, the integration, programming, and troubleshooting of automated industrial equipment. This position will require involvement from initial project stages , through development and design, on to onsite installation and debugging, and post installation customer support.
PRIMARY TASKS
Design and elaborate electric hard wiring diagrams and electric circuits using AutoCAD software. Select, order, and purchase of any and all electrical components needed for each project. Follow up on orders and assemble, wire and elaborate electrical cabinets and panels. Assist in the preparation and wiring of all cabling and wiring. Establish and insure correct conditions and sequencing through PLC and HMI programming to meet customer standards. Set up, establish, and correct proper communicate in between robots, welders, and all safety components, through either hard wiring or communication modules like CC-LINK, DEVICE-NET, COMPO-BUS, COMPO-NET, PROFI-BUS. PLCs and HMIs to work with will include , but not limited to MITSUBISHI, OMRON, ALLEN BRADLEY, and SIEMENS.
ADDITIONAL TASKS
Assist in keeping and maintaining inventory of all commonly used electric components like relays, terminal blocks, wires, cables, conduit and cable shielding, cord grips, zip ties, cable mounts, etc.
We do not have a Janitor on staff, currently all Nagoya Wel employees are responsible for the upkeep and cleaning of all areas in the facility which include shop, offices and restrooms. We have an established rotation schedule that insures a fair rotation of responsibility, but all employees are required to comply.
欧米諸国求人
USA26-06-22GJJINT2
【アメリカ求人】Control Engineer｜Visaサポートあり｜ [008]
業種
メーカー
勤務地
Lexington, KY
仕事内容
北米の製造業向け自動化設備の制御設計・導入プロジェクトを担当いただきます。
Seeking a motivated and experienced Controls Engineer to join our growing automation team.
This position is responsible for the design, programming, integration, testing, and commissioning of industrial automation systems for manufacturing customers throughout North America. The ideal candidate will have experience with PLC programming, HMI development, electrical design, troubleshooting, and machine startup activities.
The Controls Engineer will work closely with customers, project managers, mechanical engineers, and machine builders to deliver high-quality automation solutions.
Controls System Design
* Design and develop industrial control systems for custom automation equipment.
* Create electrical schematics, control panel layouts, and wiring diagrams using AutoCAD
Electrical or equivalent CAD software.
* Select and specify electrical control components including PLCs, HMIs, sensors, safety devices, servo systems, and network hardware.
* Develop project Bills of Material (BOM).
PLC & HMI Programming
* Design, develop, and troubleshoot PLC programs from the ground up.
* Develop HMI applications and operator interfaces.
* Debug and optimize machine control systems.
* Perform system integration and functional testing.
Experience with the following platforms is preferred:
* Allen-Bradley (Rockwell Automation)
* Mitsubishi Electric
* Keyence
* Omron
Machine Startup & Commissioning
* Support machine build activities and system validation.
* Perform machine startup, debugging, and optimization.
* Conduct Factory Acceptance Tests (FAT).
* Conduct Site Acceptance Tests (SAT) at customer facilities.
* Provide technical support during production launches.
* Troubleshoot and resolve electrical and controls-related issues.
Customer Interaction
* Participate in customer meetings regarding project scope, specifications, and technical requirements.
* Provide technical recommendations and problem-solving support.
* Communicate project status and technical updates.
* Support equipment installation and commissioning activities at customer facilities.
Documentation
* Maintain project documentation including:
* Electrical drawings
* PLC/HMI source code
* Network architecture documentation
* Operation manuals
* Service documentation
Seeking a motivated and experienced Controls Engineer to join our growing automation team.
This position is responsible for the design, programming, integration, testing, and commissioning of industrial automation systems for manufacturing customers throughout North America. The ideal candidate will have experience with PLC programming, HMI development, electrical design, troubleshooting, and machine startup activities.
The Controls Engineer will work closely with customers, project managers, mechanical engineers, and machine builders to deliver high-quality automation solutions.
Controls System Design
* Design and develop industrial control systems for custom automation equipment.
* Create electrical schematics, control panel layouts, and wiring diagrams using AutoCAD
Electrical or equivalent CAD software.
* Select and specify electrical control components including PLCs, HMIs, sensors, safety devices, servo systems, and network hardware.
* Develop project Bills of Material (BOM).
PLC & HMI Programming
* Design, develop, and troubleshoot PLC programs from the ground up.
* Develop HMI applications and operator interfaces.
* Debug and optimize machine control systems.
* Perform system integration and functional testing.
Experience with the following platforms is preferred:
* Allen-Bradley (Rockwell Automation)
* Mitsubishi Electric
* Keyence
* Omron
Machine Startup & Commissioning
* Support machine build activities and system validation.
* Perform machine startup, debugging, and optimization.
* Conduct Factory Acceptance Tests (FAT).
* Conduct Site Acceptance Tests (SAT) at customer facilities.
* Provide technical support during production launches.
* Troubleshoot and resolve electrical and controls-related issues.
Customer Interaction
* Participate in customer meetings regarding project scope, specifications, and technical requirements.
* Provide technical recommendations and problem-solving support.
* Communicate project status and technical updates.
* Support equipment installation and commissioning activities at customer facilities.
Documentation
* Maintain project documentation including:
* Electrical drawings
* PLC/HMI source code
* Network architecture documentation
* Operation manuals
* Service documentation
欧米諸国求人
USA26-06-22GJJINT1
【アメリカ求人】Electrical Engineer｜Visaサポートあり｜ [008]
業種
商社・卸売
勤務地
Cincinnati, OH / Lexington, KY
仕事内容
日系企業にて、日英バイリンガルのElectrical Engineerを募集しています。
顧客と日本メーカーの橋渡し役として、自動化設備に関する技術提案や課題解決を行うポジションです。
PLCプログラミングやプロジェクト管理に加え、顧客との仕様確認や技術調整にも携わります。エンジニア経験を活かしながら、北米市場でグローバルに活躍したい方におすすめです。
・PLC programming (PLC experience with Omron, Mitsubishi, etc.)
・Project management
・Customer interaction for scope and specification meetings
顧客と日本メーカーの橋渡し役として、自動化設備に関する技術提案や課題解決を行うポジションです。
PLCプログラミングやプロジェクト管理に加え、顧客との仕様確認や技術調整にも携わります。エンジニア経験を活かしながら、北米市場でグローバルに活躍したい方におすすめです。
・PLC programming (PLC experience with Omron, Mitsubishi, etc.)
・Project management
・Customer interaction for scope and specification meetings
